Product Categories

What are the characteristics of the knife type split machine?


The knife type points machine tool stress ratio of a lot of knife type, the tool is very durable, the more electronic factory is willing to adopt knife type points plate machine.
1, double sided board supporting design, so that the double-sided plate can be more firmly cut.
2, stable operating mechanism and prevention of PCB tin road surface, solder joints of electronic parts, such as electrical circuit for folding process is damaged caused by improper external force.
3, the installation of high frequency eye protection lighting device, improve the operating quality of the operator.
4. Design of special circular tool material, ensure the smoothness of PCB segmentation.
5, the cutting stroke distance touch type five adjustments, can quickly switch between different size
7, knife type sub machine knife plate, the machine an all optical eye and emergency stop switch safety mechanism design, to ensure the safe use of the operator.
8, the cutting board process PCB do not move, round knife slip, to ensure that the electronic components of the substrate is not mobile and damage.
9, the machine adopts no bending stress and high steel C structure principle design.
10, where there are S.M.T.D.PC V-CUT plate can be applied to this machine.
11, the operating motor optimization drive separation speed: 300/500MM/SEC.
12, when the board to keep the PC plate is not moving, the knife around the knife, quality assurance.
13, the machine segmentation, reduce stress, prevent the solder joint cracking.
14, the separation length: 400MM, PCB thickness: 0.5MM-3.2MM (the segmentation length is 400MM above can be customized).
15, the remaining PCB thickness: the standard 1/3PC thickness, MAX0.8MM, MIN0.2MM.
16, V groove depth C minimum 0.25MM after the separation of the external size: 0.1MM-0.2MM.
17, the installation of photoelectric sensing device, when the operator hand into the board will automatically stop interval.